MC28 wiring diagram WANTED

**Sun May 06, 2007 7:16 pm » Post: #1 » Download Post**

Hi all

Can anyone help me out with a wiring diagram for the MC28? I would be very grateful if someone had a copy they could e.mail or post me.

Thanks

Dan
07919 303762
dan.williams@s-n.com

**Sun May 06, 2007 8:21 pm » Post: #2 » Download Post**

E-mail on its way.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sun May 06, 2007 9:54 pm » Post: #3 » Download Post**

Get the HRC loom Dan... Wink

_________________
NSR300R - Why did i ever have a 250...

**Mon May 07, 2007 6:07 am » Post: #4 » Download Post**

Maxim. Good idea. I'd be happy to buy a HRC loom, does anyone have one for sale? Or I could buy one, any idea of the part number?

Also, thanks Andy, received your e.mail this morning. Much appreciated.

Dan

**Mon May 07, 2007 11:02 am » Post: #5 » Download Post**

gekoracing1 wrote:Maxim. Good idea. I'd be happy to buy a HRC loom, does anyone have one for sale? Or I could buy one, any idea of the part number?

Also, thanks Andy, received your e.mail this morning. Much appreciated.

Dan

I`ve sent you some details Dan.
There`s a couple of options.
Cheers
Roy.

**Mon May 07, 2007 12:44 pm » Post: #6 » Download Post**

The '28 HRC loom doesn't actually do anything a spliced loom doesn't, it saves a fair old chunck of weight (no fuse box and tonnes of the loom "missing") and makes it look very tidy though.

Part # is 32100-NKD-970

Tom's probably got (another?) one lying around Rolling Eyes

_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Mon May 07, 2007 4:00 pm » Post: #7 » Download Post**

Yeah Fontyyy I think that's what Dan wanted to do, save weight and tidy things up a bit...
_________________
NSR300R - Why did i ever have a 250...

**Tue May 15, 2007 7:09 pm » Post: #8 » Download Post**

I took everyone's advice and ordered an MC28 HRC race loom off Apex Leisure last week, but they have since refunded my money as they are relocating abroad.... so I'm still looking for one or a new supplier who could get me one.

Normal Honda dealers cannot order it as it's a race part... I have tried.

Any leads or helpful ideas?

Thanks

Dan 07919 303762

**Tue May 15, 2007 7:51 pm » Post: #9 » Download Post**

PGM-III and HRC harness/delimiter? Twist my arm by e-mail if you like.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue May 15, 2007 11:32 pm » Post: #10 » Download Post**

Just a point or two as you have 10 days to ready this bike...

Does a PGMIII work properly with the 28 carbs (and TPS) and minus the GPS?
Does the '28 seat subframe have somewhere to bolt a PGMIII?
Is the '28 RC servo the same? The air solenoid plumbing for sure is not.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

MC28 wiring diagram WANTED

MC28 wiring diagram WANTED

MC28 HRC loom

Re: MC28 HRC loom

MC28 HRC loom - Apex Leisure