Triple clamps?

**Tue Feb 28, 2006 3:40 am » Post: #1 » Download Post**

Are the triple clamps and the same across the models MC18 to MC28?

Cheers
Kieran
_________________
The Chopster

**Tue Feb 28, 2006 3:43 am » Post: #2 » Download Post**

depends what you mean by the same.

Same same? No!

**Tue Feb 28, 2006 4:25 am » Post: #3 » Download Post**

Same same but different though... yes! Smile

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Feb 28, 2006 4:46 am » Post: #4 » Download Post**

The 21 and 28 run the same fork pitch and offset, so the clamps are 'swappable'....new word for the day.

Not sure about the 18, but I think it also has the same dims, but the shaft is different on the 18 compared to the 21/28.

The 18 steering stoppers are also in a different position to the 21/28.

**Tue Feb 28, 2006 5:01 am » Post: #5 » Download Post**

So, "same same", no... but "same same, but different"... yes! Very Happy

One common dimension between MC18, MC21, and MC28 - 41mm fork size!

"Time for bed" said Zebedee!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Feb 28, 2006 11:20 pm » Post: #6 » Download Post**

OK smartarses

How swappable are they?

In particular, I want to know shaft dimensions. Do they use the same bearings?
_________________
The Chopster

**Wed Mar 01, 2006 12:04 am » Post: #7 » Download Post**

what are you doing ? are you just changing the bearings or swopping the front end ?

**Wed Mar 01, 2006 2:22 am » Post: #8 » Download Post**

Bearings same same