Hi all,

I seem to have caught the bug of making my NSR go faster until it goes pop does anyone know of any aftermarket pipes for the MC16? Do tyga make any?

Chers, Mat.

The best way to make an NSR go faster is to ghost ride it off a cliff.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

What an insightfull piece of advice. Bet he's mad he never thought of that!
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

Can we hold a NSR ghost riding cliff jumping day as I have a few I want to put to the big leap test?
_________________
If I have to take the carbs off once more...

i,ve not seen any after market pipes for the 16.
you could try fitting some MC18 ones. wayne lent me a set to try and it looked like they would fit. the cans are higher so a bit of work would be needed there.

Hi,

Thanks for the replies... sadly I don't live near any cliffs, there have been times while trying to jet the thing that I would have seriously considered it!

I've got MC18 barrels and carbs, standard airbox and filter, I don't ride it very much, so I'm not bothered about it being able to do millions of miles between rebuilds. That's probably just as well thinking about it...

Jeff - good plan - I'll try finding some MC18 pipes. Do you mean Honda standard ones or aftermarket ones?

PS sorry to hear all about these siezure stories.... I'm sure it's only a matter of time before I'm posting for barrels etc

Thanks, Mat.

standard 18 pipes are better than MC16 ones. but i can,t see why after market ones would not fit. most of them have the can held up by air, so less of a problem

Cheers - I feel a trip to the wanted ads coming on...

Mat.

Hi all,

I emailed Tyga - they said they do MC18 pipes but not MC16, due to lack of demand, and they don't know if the mounting points are the same.

So the question is - has anybody tried fitting MC18 pipes tothe MC16? Did it work?

Unless there are loads of MC16 owners out there who want to get tyga pipes to make it worth their while making some....

Cheers, Mat.

if you want to come down to southampton and get them i,ll lend you some MC18 pipes to try. they are waynes spares but i,m sure he wont mind.
i might even let you look at my HRC pipes., fitted to my 16

there are some mc18 pipes on e bay for 99p.

Thanks Jeff - I may do that...

Wayne - thanks for the ebay info - bu tI couldn't find them - have you got an item number?

Cheers, Mat.

Btw Jeff - did the HRC pipes make a big difference to the performance?

Cheers, Mat.

Std '18 pipes and a modded airbox should be good for 60bhp jetted correctly
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

fontyyy wrote:Std '18 pipes and a modded airbox should be good for 60bhp jetted correctly

_________________
MC21SP - Roth-tax
CBR400 - track
MC21R - sold
MC21SP - sold