Hi guys , I have a MC28 that I have upgraded with a P030 HRC card , wire splice , pod filters and expansion chambers, the next step is the jetting and am wondering if T2 Racings MC21 kit will work on the MC28 - does anyone have any experience with this kit or alternate ones ??
poosterwyk wrote:
I have a MC28 that I have upgraded with a P030 HRC card , wire splice , pod filters and expansion chambers, the next step is the jetting and am wondering if T2 Racings MC21 kit will work on the MC28...
Short answer: No.
Long answer: Only the main jets are the same between all the NSRs. You will need a kit specific to the MC28, with the correct needles & holders, emulsion tubes, and slow (pilot) jets. Powerjet blanks and the HRC X & Y air correction joints are interchangeable with the MC21 parts, although the X-piece is plumbed slightly differently on the MC28. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
I had T2Racing make a dedicated kit for Prelude 2.2, but it was expensive, to say the least. He'll need to tell you if it was worth it really. Saying that, if you've gone the pod filter/race pipes/HRC card, you don't really have much choice, if you want it right. You can bodge certain aspects of it, but I'd never personally recommend it or do it.
I talk to T2 most days, so I can ask if they will do another kit for you if you want? _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
poosterwyk wrote:
that would be terrific - many thanks
T2 are pricing up the individual parts to make up the kit, and direct shipping to Canada with the current exchange rate. I'll contact you directly with the price once they let me know. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
I've PM'd you a request for a shipping address. Even if you can just supply a generic address for your area please, T2 can then get an accurate quote together. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
spirit wrote:I've this kit available .. Not sure if it's an Mc21 or Mc28 specific . . I'll have to research it
2pr of 16151-nkd-840 j2bc new in packet
1 pr of 16131-nkd-840 j2ba new in packet
1 pr of 16132-nkd-840 j2bb new in packet
1 of 16132-nkd-840 j2bb new in packet
1 pr of 16132-nkd-840 j2bb S/Hand with circlips
3 black y pieces
2 red x pieces
1 pr emulsion tubes 16165-nh3-911
1 pr mc 28 needles a25b
1 pr mc 28 needles a25a
1 pr needle holders 16186-nh3-911
1pr pilot jets 99103-ma40420
13 pr mains new in packets
9 needle circlips new in packets
5 pr new and s/h jets 1pr 182,1pr 195,1pr 185,1 pr 180,1 pr 190, _________________ MC21SP
TDR250
Ironic that you have an odd J2bb... I had to buy one from Yahoo! Auctions because one of mine was "lost" (don't ask!), and by the time I'd paid taxes and shipping (no EMS to UK at the time because of COVID, so had to be sent Fed-Ex), it cost me a small fortune! 🙄 _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
Hi guys - thanks for all the input - I am not sure exactly what is needed get my bike tuned properly but from what I read on the website and cross referencing it with the "MC28 HRC cab details " file , it looks like the main components for the kit are : emulsion tubes ( 16165-NH3-911)
Needle holders ( 16186-NH3-911)
Needles ( A25A,A25B & A25C )
Main Jets :180/182/185/188/190/192/195/198/200/205/210
"Y" joint and Red "X" joint
All of these parts ( minus some of the MJs) are included in "Spirits" list of parts he has available .I understand that there is a power jet blank that is also needed but I can get from Japan .wouldnt these parts be a good start ?? Appreciate all your feedback
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
