poosterwyk wrote:
I have a MC28 that I have upgraded with a P030 HRC card , wire splice , pod filters and expansion chambers, the next step is the jetting and am wondering if T2 Racings MC21 kit will work on the MC28...

Short answer: No.

Long answer: Only the main jets are the same between all the NSRs. You will need a kit specific to the MC28, with the correct needles & holders, emulsion tubes, and slow (pilot) jets. Powerjet blanks and the HRC X & Y air correction joints are interchangeable with the MC21 parts, although the X-piece is plumbed slightly differently on the MC28.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!