I have a R6K with a wire splice and it came up with 50hp at the rear wheel. Questions....I have questions....

1. Is that about what is to be suspected?

2. If I wanted to get some more power but not ruin engine life would pipe be my next purchase? If so what pipes? and then what jets with those pipes should I start with?

3. Is there a airbox mod or anything for these bikes?

The power curve looks almost perfect so the jetting seems to be spot on.

What are the compression readings?

bushman wrote:What are the compression readings?

Never checked them. The bike has 3700km on it, starts easy, runs great. I made the assumption compression was good.

What's the proper way to check the compression? I've never done it on this type of motor.

https://www.youtube.com/watch?v=myuzWaXSdw4 ,readings should be around 120/125 psi