Bodywork UK

**Sun Jun 19, 2005 12:34 pm » Post: #1 » Download Post**

Hi Everyone,

I'm looking for a UK source of pattern bodywork expecially seat units, MC21 or MC28

Thanks for any info

Steve

**Mon Jun 20, 2005 6:28 pm » Post: #2 » Download Post**

You could try http://www.apexleisure.co.uk/nsr.htm Failing that I would recommend Tyga racing (see the link on this sites homepage). I've just taken a tumble from my mc18 and I ordered a new fairing yesterday. It's not the same as the original Honda bodywork but I think it looks better.

Link edited by Admin
_________________
stu

**Mon Jun 20, 2005 8:26 pm » Post: #3 » Download Post**

I had a feeling Race Products do a road/race fairing for the 21.
_________________
If I have to take the carbs off once more...

**Mon Jun 20, 2005 8:59 pm » Post: #4 » Download Post**

Stuart the link doesn't work for apex. Stephen I checked Race products site and it seems they don't do nsr stuff Question

Is that correct

**Tue Jun 21, 2005 7:44 am » Post: #5 » Download Post**

Stuart Laughton wrote:I've just taken a tumble from my mc18
Link edited by Admin

are you ok mate? what happened?
_________________
MC21SP - Roth-tax
CBR400 - track
MC21R - sold
MC21SP - sold

**Tue Jun 21, 2005 5:34 pm » Post: #6 » Download Post**

Thanks for your concern, Monkey. I binned it at Rockingham round that long left hander. Lapse of concentration and all that. Took a detour across the grass, hit a cone and had to bail out before I hit the armco. I did hit the armco and the bike ended up upside down against the fence.No major damage apart from the fairing which is totally trashed. Shame about the paint job though...
_________________
stu

**Tue Jun 21, 2005 7:34 pm » Post: #7 » Download Post**

Try GPS Laminates. They made the race seat / fairing I used on my MC21 when I was racing it.
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

**Tue Jun 21, 2005 9:03 pm » Post: #8 » Download Post**

I would recommend Tyga Racing. They are not based in the UK but I've found their service and delivery second to none. Their bodywork looks absolutely stunning (I've just ordered a new fairing for mine). Or are you wanting too keep the original profile of your machine?
_________________
stu

**Tue Jun 21, 2005 10:13 pm » Post: #9 » Download Post**

Hey Dave,

I race an NC30 too, what`s yours like?
_________________
NC30 racer, MC18 toy bike and SV650S "Adult days" bike.

**Wed Jun 22, 2005 7:30 am » Post: #10 » Download Post**

Thanks for all the help guys, will let you know how I get on with these sources.

I want to keep the original shape so Tyga not really an option.

Thanks again!!

**Wed Jun 22, 2005 7:39 am » Post: #11 » Download Post**

I think Tyga do original shape stuff check out

http://tyga-performance.com/site/index.php?cPath=12_15_29

Hope that helps

**Wed Jun 22, 2005 12:39 pm » Post: #12 » Download Post**

I've ordered a seat unit from GPS Laminates, 85 quid delivered, reckons on a 2 week turnaround so will let you guys know if its any good in terms of fit/quality etc Cheers

**Wed Jun 22, 2005 9:39 pm » Post: #13 » Download Post**

Stephen once youve had it fitted please put a pic up. Thanks

**Sat Jun 25, 2005 11:55 am » Post: #14 » Download Post**

Had the best set of bodywork for the RR from them and it fits SO well, I interchange panels with the o.e. Razz

But I DID take 2 days to adapt it and fit it properly. Wink