Installing racetech springs

**Sat Jun 11, 2005 3:08 pm » Post: #1 » Download Post**

Has anyone here installed racetech fork springs? I'm wondering how much of a preload spacer is needed if any? It looks like the new spring is the same length as the stock spring and spacer.
_________________

**Sat Jun 11, 2005 5:45 pm » Post: #2 » Download Post**

Never mind I took my forks apart and answered my own question. Yes I need to make preload spacers. Making spacers is trial and error to your own liking. It looks like to make the new spring the same length as the old set up the spacers need to be about 56mm give or take a couple mm.

Just realized that answering your own post is sad Sad

_________________

**Sat Jun 11, 2005 5:52 pm » Post: #3 » Download Post**

Steve C wrote:Just realized that answering your own post is sad

Not at all! The post will most likely be useful to someone in the future... if they use the search feature!

Thanks for letting us know.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!