Just received a rear magtek that I purchased. The sprocket that came with it was well worn. I have another that I've been waiting for a reason to install. It's been a very long time since I changed a sprocket and that was on a Yamaha so excuse the stupid questions coming.

The sprocket I took off has threaded lugs (?) that seem to be pressed into the sprocket but the new one doesn't. Are these removeable or am I missing something?

Thanks for any insight you guys have for me.
Don

Nobody?

Press 'em out... press 'em back in to the new one!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Thanks Andy, I just didn't want to do that until I knew for sure.

Don

I think the original Honda sprockets come complete with the inserts. It certainly looks like it from the diagram in the parts manual. I know the aftermarket ones don't however, so pressing them is the only answer.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Don't know if this helps but AFAM sprockets come with the lugs attatched.