Martin77, the owner of a rather impressive TDR250 that came to the Dyno-Day, is interested in developing some low-cost race pipes for us.

If you are wary of crashing those lovely Jha's/TYGA's, want a lower cost alternative for racing, or are simply on a tight budget, then please register your interest on this thread! We won't hold you to it, but we'd like to know!!

We will get started on the first developmental sets ASAP, and get some dyno results to publish, but would like an idea of support please.

The pipes on Martin's TDR are absolutely wonderful! Hydro-formed and seam welded, his talent is seriously underused! I will post some images soon.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

I'm always on the look out for some new pipes...

if anyone wants GP style MC16 pipes i,ll give up my HRC,s to copy.
i can say i saw the TDR pipes martin made, they look and sound ace. he knows what hes doing.

I am definitely in the market for set (s) of cheap race pipes. My current ones are a bit battered and don't want to risk bouncing Tyga pipes down the track.
_________________
MC28 SE -sold-
MC21 with RS250 engine -for sale-
MC21 race bike -soon for sale-

If the power and price are good, I'd be interested - my TYGA's have handled a bashing but are looking decidedly second hand now. What cans would the pipes be made to fit?
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

The pipes will be made to fit the MFactoryWest cans sold through the Marketplace.

Naturally we will have dynographs of the pipes fitted to both a stock MC21 and a "fettled" MC21 to start with. Other models will follow depending on demand!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

I'd be interested for the 28.

Ya count me in ! Are they S.S. or GP style ?
_________________

They will be side-by-side (SP) style.

Thinking about a previous question too, we would most likely make the pipes suitable for stock cans to fit, that way there is already a large range of cans available, as well as our MFW cans on the Marketplace.

We're purely thinking about a good performing low-cost alternative for racing/trackdays/low budgets to start with, so if you already have a set of silencers (we'll even test them with stock cans) it could be a great entry level pipe.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

i will have some,what about the end cans Martin made?i would like a pair of them as well.

Well.....looks like I'll be stuck in the workshop for the forseeable future then!

Things are still being figured out, and it might take me a short while to get the basic designs right, but at least I know there's demand out there (I struggled to sell my first TDR ones).

As for those cans Wayne, I might be able to knock some up for you (they took almost as long to make as the chambers themselves)....if I can find some suitable metal that is. (the last ones were sourced from a scrap yard) give me yer email and I'll get back to you.