Suzuki K6 Front End

**Sat Nov 05, 2011 3:11 pm » Post: #1 » Download Post**

Complete front end off a Suzuki GSXR1000 K6.

Forks was fitted to a NSR250, can also be made to fit VFR400.

Sale will include :

Top & bottom yoke
L & R Fork legs
Axel
Handle bars
Calipers
Carbon Fiber Fender
Braided hoses

The forks came from a crashed damaged bike so they were repaired. There are some minor things still needed to be done.

Please have a look here for all the photos : http://s24.photobucket.com/albums/c23/Alzazor/K6%20Front%20End/

Forks are sold AS IS, you will still have to check that everything is fine e.g. Spacing etc.

$785 Including Airmail world wide.
$420 Including Surface Mail world wide.

**Sat Nov 05, 2011 3:59 pm » Post: #2 » Download Post**

Mario, if you are wanting to post any more, then you will need to become a Supporting Vendor.

Please do not post any more trade advertisements, it's not fair on those who are Vendors.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sat Nov 05, 2011 4:14 pm » Post: #3 » Download Post**

Does "Carbon supporter" not = Supporting Vendor ?

And how am I posting "Trade Advertisements" ?

Please advise ?

**Sat Nov 05, 2011 9:16 pm » Post: #4 » Download Post**

You are a trader, Mario. A TYGA dealer, and maybe for others too. That's trade.

And no, a £10 subscription doesn't constitute becoming a Supporting Vendor.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sun Nov 06, 2011 11:06 am » Post: #5 » Download Post**

Andy, I have never sold any Tyga parts here and will never. Just because I am their South African representative does not mean I will sell their parts world wide.

The parts I have sold here in the past, including these forks and future parts are secondhand stuff which come from bikes I buy locally and not need anymore.

**Sun Nov 06, 2011 2:22 pm » Post: #6 » Download Post**

You are wasting your time arguing boet

**Sun Nov 06, 2011 5:11 pm » Post: #7 » Download Post**

Forks now SOLD.