Since I've had the clutch out to hunt for the leaky seal, I've noticed the notching on the basket. Any opinions on whether this is good enough to re-use as-is, needs a little filing, or is dead and ought to be replaced?


_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

That'll go again... I've seen worse, but it's far from ideal. If the hub or basket have too many ridges it can cause the clutch action to judder or become snatchy.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

They arn't that expensive Dave. Price one up. I can get you some discount if you want one.
_________________
If I have to take the carbs off once more...

Cheers boys, will get back to you...
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

By the way Dave, that's the hub, not the basket! Just in case you go asking someone on the phone for the wrong part!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

If you plan to keep using that clutch center, you will want to keep an eye on it for further damage. Once the metal starts to get grooved, it will be easier for more damage to happen. As more damage happens, there is the possibility for the metal clutch plate teeth to get stuck in those grooves, resultsing in the clutch not working properly.

You can smooth out the grooves for a temp fix, but I would get one ordered just to have it ready to go. Would suck to be at track day with your clutch not working, just ask my girl friend about that with her Ducati 748 that had that issue.

Andy wrote:By the way Dave, that's the hub, not the basket! Just in case you go asking someone on the phone for the wrong part!

Good point, well presented!
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

StephenRC45

I know this was an old post, but I though I would ask anyway. I am in need of an inner hub and outer basket for my MC 21 SP.

Can you still get them???

Thanks for your time.

Parts still available, but there's been a huge price increase on them. The hub is more than double what it was, and the basket is over £200 now!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Andy wrote:By the way Dave, that's the hub, not the basket! Just in case you go asking someone on the phone for the wrong part!

But on the bright side, at least you'll be able to carry all your eggs in it.

Andy will explain..............

Time for Tyga to start re-manufactering them?

Time for you to put that bike togeather
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

Gimme a chance, I've only just finished moving house!

Besides, the weather is so rubbish I wouldn't be riding it anyway...

Dave Ett wrote:Time for Tyga to start re-manufactering them?

You mean something like this?


Naaa. Ain't got time to design it.

That's the fella!

Probably not had time to productionise and manufacture them either eh?