hi all i've had a post running for a while now with no response so thought i'd try the message board , im after a cdi unit for my mc21 ( pgm III) or someone who could repair mine , it has a damaged capactor on the ignition side but the black gunk they fill these things with is preventing me form trying to do this myself, there must be a spare one out there some were, any help at all i would be most greatfull. cheers all.

Marks for persistence, you obviously need some help.

I may have 2 spare PGM-IIIs. I say may, as I've bought a HRC PGM-III but as yet untested. If it the HRC PGM works, I'd be happy to sell you a fully functioning PGM-III, one of my then 2 spares. I hope to have the bike assembled and running by 2nd weekend of May, I'm currently overseas.

Alternatively, try ok!shon / yahoo auctions, usually several PGMs on there for sale.

Expect this post to be locked, so PM me if you want to chat more.
_________________
Rich
MC21 Track Bike / RS250 NF5 'Spencer', NX5 'Cadalora' & NXA 'Aoyama' / RS500 / Two Brothers Racing RC30

Dave Ett was looking into repairing pgm's. I sent him some dead ones to play with a while ago, I dont know if he had any luck with it?
Some one once posted a link to a Japanese web site which showed how to repair them so I guess its possible.

o o


Last edited by DifferentStrokes on Mon Sep 28, 2009 5:46 pm; edited 1 time in total

I have 4 pgm iii with blown pv operation . I would like to have them repaired too as i do not have the skills to do so myself !
Who can help ?

Neal

o o


Last edited by DifferentStrokes on Mon Sep 28, 2009 5:46 pm; edited 1 time in total

Please search on the Yahoo Japan site for NSR parts here :


http://search1.auctions.yahoo.co.jp/search?sb=desc&desc=nsr+250&auccat=26318&acc=jp&apg=&f=0x52&s1=cbids&o1=d&alocale=0jp&mode=1

paul g wrote:Dave Ett was looking into repairing pgm's. I sent him some dead ones to play with a while ago, I dont know if he had any luck with it?
Some one once posted a link to a Japanese web site which showed how to repair them so I guess its possible.

This guy would be me...!!! and this is the link...

http://fukasaku-mc21.blog.so-net.ne.jp/2007-11-10

Jazz4 wrote:
Please search on the Yahoo Japan site for NSR parts here :

http://search1.auctions.yahoo.co.jp/search?sb=desc&desc=nsr+250&auccat=26318&acc=jp&apg=&f=0x52&s1=cbids&o1=d&alocale=0jp&mode=1

Ahhhh... just look at this little beauty, currently sat at less than £850!

MC16 - low kms

A full restoration with just a hair-drier to remove a couple of stickers!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

jri711 wrote:hi all i've had a post running for a while now with no response so thought i'd try the message board , im after a cdi unit for my mc21 ( pgm III) or someone who could repair mine , it has a damaged capactor on the ignition side but the black gunk they fill these things with is preventing me form trying to do this myself, there must be a spare one out there some were, any help at all i would be most greatfull. cheers all.

I've tried replacing those capacitors, but it seems that there's something else that makes them blow. First was a PGMIV. It worked for about 5 seconds before smoke poured out and it went pop. Another try was a PGMIII which went bang again within about 2 seconds and spewed all the molten juice everywhere. Quite amusing