NF5 pre 91 are 41mm RWU, same as the NSR, and will fit in NSR triples, although they are very short.
NF5 92 are USD with calipers similar to the NSR.
NX5 93 on have a different caliper pitch.
If I recall correctly, NF5 USD forks will fit into RVF400 triples... but good luck finding a set of those too!
If it's forks only, see if you can find some data on ZXR400 triples or maybe if you're desperate, RGV triples! If they are the same size you can use those with an NSR sized stem. I've NSR's fitted with both those front-ends. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
Yes, they are short. Those aren't NF5 forks, they are modified NF5 internals matched to NSR parts, with either NF5 or MC18 legs, but I don't recall which.
I can't remember exactly, but I think the difference is something around 40mm. The RS top clamp is not offset as much as difference in fork length. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
These are even earlier RS forks, although the triples look the same as my NF5 ones.
Andy... I didn't know that the NF5 went to '93... I thought it ended in 1992, with the double sided swingarm, 90 degree V-machine, and NX5 started in '93 with the SS swinger and 70 degree V. _________________ The Chopster
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
