Race bike build

Tue Nov 18, 2008 3:26 am » Post: #1 » Download Post

Hi Everyone , Im in the process of putting together my Nsr250(21) race bike build, I've been planning it for a while an have got most of the bit's i'll need. So hopefully it'll be a rapid build.
I'll be asking a ton of question so thanks in advance for your wisdom.
These pic's are of the basic chassis.
Front forks are k6 Gixxer items revalved etc to suit the lower weight of the NSR
Still got the original shock in as I'm waiting for the mighty ohlins to arrive.


Last edited by montsta56 on Tue Nov 18, 2008 5:30 am; edited 1 time in total

Tue Nov 18, 2008 3:27 am » Post: #2 » Download Post

Another pick of the frame Excuse the mess my shed's in
Old 18 radiator in while the Real one getting flushed

Tue Nov 18, 2008 1:58 pm » Post: #3 » Download Post

looks good with those forks in mate and if you think your sheds untidy you should see our garage it looks like a bombs gone off whats the plans for her mate bodywork etc
_________________
ive seen more tarts than mr kipling

Wed Nov 19, 2008 4:54 am » Post: #4 » Download Post

Cheers Si, Not 100% sure yet on bodywork, It's keeping me awake at night contemplating such things bit more work done Fitted wheel an plumbed up brakes ect. Front guard courtesy of Tyga Lovely.

Wed Nov 19, 2008 7:17 pm » Post: #5 » Download Post

i wish i had got some radial forks now after i had to buy new legs and the revalve on the rvf ones i could have got some radials and revalved for not much more money
_________________
ive seen more tarts than mr kipling

Wed Nov 19, 2008 9:28 pm » Post: #6 » Download Post

Yeah I know what ya saying my whole front end set up cost me maybe 400 pound. Cant wait to see how well she stop's. Dearest parts are wheels for late model Gixxers there fairly light tho for a factory wheel

Thu Dec 04, 2008 8:40 am » Post: #7 » Download Post

UPDATE::
New rear shock arrived today bottom ends together new crank an seals an clutch(dry) Hope to have the Engine fitted this week end.

Fri Dec 05, 2008 9:57 am » Post: #8 » Download Post

Fri Dec 05, 2008 12:11 pm » Post: #9 » Download Post

How much did that Ohlins set you back mate (new or used and from where)?
(the NSR Ghestapo strikes again )

Fri Dec 05, 2008 2:00 pm » Post: #10 » Download Post

Fri Dec 05, 2008 7:38 pm » Post: #11 » Download Post

Cheers For the positive feedback guy's. I Ordered the shock thru local Ohlins Agent, Pretty sure He ordered it direct from the facotry instead of building it up off the spec sheet. Cost was $1400 NZD's so at cuurent exchange about 50 Quid

Fri Dec 05, 2008 8:34 pm » Post: #12 » Download Post

Sat Dec 06, 2008 1:14 am » Post: #13 » Download Post

Update

Fri Dec 26, 2008 10:20 am » Post: #14 » Download Post

Bit of an update Guys,Engine is all back together an fitted along with a lovely set of tyga pipes, Am now starting to do Electrics . Which is definitley not my strongest suit .
Does anyone have any tips as far as a race loom goes? I've printed out the wiring diagram from the tech section (thanks Andy ). Is it literally a case of hacking out the wries that are not needed or is there any that have to be bridged Ect. Cheers

Fri Dec 26, 2008 4:55 pm » Post: #15 » Download Post