Stink wheels Dyno Day - Romford, Essex

**Fri Jun 27, 2008 8:58 am » Post: #1 » Download Post**

We have finally worked out a date for this years annual two-stroke dyno day. It will be held on the 26th July. Moved forward from it's usual September date due to racing commitments.

The usual day of two-stroke flumes and screaming spannies. £10 per bike with free food and drink all day. Everyone who turns up will get at least one run on the dyno, more if time allows.

Gibson Exhausts
Unit 5
Pentowan Farm
Church Road
Noak Hill
Romford
Essex, RM4 1LD

Tel: 01708 372122

So who fancies attending?

Duffs
_________________
Steve D

**Fri Jun 27, 2008 10:03 am » Post: #2 » Download Post**

Clash with DP F250 at Cadwell, there's 20+ of the best proddy 250's in the country that won't be there!
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Fri Jun 27, 2008 10:42 am » Post: #3 » Download Post**

Count me in.....

What do i need to do next to get on the list?

Just need my TYGA pipes delivered now.......4 weeks and counting is taking the piss now.... still no delivery date Evil or Very Mad

Cheers Rob

**Fri Jun 27, 2008 4:33 pm » Post: #4 » Download Post**

If you ordered side by sides Tyga have no stock. They (Tyga) are super fast at delivery presuming they have the parts made.

It does say on the site what they've got, or not in this case.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Fri Jun 27, 2008 8:31 pm » Post: #5 » Download Post**

I'm up for that as it's just around the corner from me,wont tell them it's a 300 either Laughing

cheers Rob.

**Sat Jun 28, 2008 7:24 am » Post: #6 » Download Post**

Is was there last year, more by accident than planned. Great to see loads of 2 strokes, especially the Sheene rep RG500
Don't think I'll make this year as I'm probably going to be in Cornwall drinking!
Will be great to see the power board with some 250s trashing 350s & 400s

**Sat Jun 28, 2008 10:48 am » Post: #7 » Download Post**

its only about 30 mins from me
me and and mate are looking to go so may see you there
_________________
Half the strokes, twice the fun

**Sun Jul 20, 2008 2:00 pm » Post: #8 » Download Post**

Is this Dyno day still happening and is anyone from this forum going?

Cheers Rob

**Sun Jul 20, 2008 3:14 pm » Post: #9 » Download Post**

As far as i know it is still on, i will be there early afternoon, although unfortunately in the car and not on the bike,

Duffs
_________________
Steve D

**Wed Jul 23, 2008 7:31 pm » Post: #10 » Download Post**

I might take a ride down on Saturday morning, anyone else going....Nigel,Rob?

**Wed Jul 23, 2008 7:54 pm » Post: #11 » Download Post**

Hi paul,im waiting on new gaskets so i can put me 18 top end back on,i'll still turn up though if anybodys going down.
cheers Rob.

**Wed Jul 23, 2008 9:10 pm » Post: #12 » Download Post**

were out fri eve wont be home till the very early hours
so i dont reckon ill be around
_________________
Half the strokes, twice the fun

**Fri Jul 25, 2008 6:32 pm » Post: #13 » Download Post**

I will probably go down their about 11ish.
Ive got some mc21 gaskets if you are stuck Rob. I know the heads are different but I think the base gaskets might be the same?

**Fri Jul 25, 2008 8:45 pm » Post: #14 » Download Post**

That would be great mate if you could Smile

mc21 cylinder gaskets will fit,it doesn't look like the ones i ordered will be here,i'll be there about 12 as i'm working in the morning.I also need 2 gudgeon pin circlips if you have any Wink

,i dont want to run the risk of reusing my old ones,and i will send my new bits to you when they finally arrive.
Cheers Rob.

**Sat Jul 26, 2008 7:08 am » Post: #15 » Download Post**

I will see you there Rob, Ive gut some circlips as well I'll bring them down.