MC28 Speedo to MPH

**Mon Jun 02, 2008 5:03 pm » Post: #1 » Download Post**

Basically can this be done?

I have seen some converters for the GSXR digital dashes, to convert them to MPH from KMH, and wondered if any one had seen similar device for the MC28

Cheers Rob

**Mon Jun 02, 2008 5:17 pm » Post: #2 » Download Post**

Hi there

yes it can be done ( MOTRAX ) make one i have one for mine but i took it off because it was not very good as it kept flicking down to 0mph as i was driving!!!

**Mon Jun 02, 2008 5:22 pm » Post: #3 » Download Post**

Can't see why not. It's most likely only an inline resistor. Look for one for an import CBR or Hornet or something, or buy the cheapest one you can find and modify it for the NSR?

Can't see the problem if you get a proper ignition card for it, as the speedo will be replaced by a much more useful temp guage anyway! ROTFLMAO

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon Jun 02, 2008 8:55 pm » Post: #4 » Download Post**

the speedo convertor i have is free to good home if anyone wants it!!!!

may of been just been a bad connection but i didnt want to mess about with it!!!!

**Mon Jun 02, 2008 9:27 pm » Post: #5 » Download Post**

I will take it off your hands and owe you some beers.....lol

Cheers Rob

**Mon Jun 02, 2008 9:30 pm » Post: #6 » Download Post**

its yours!!!!

are you going to the motorcycle world show in july???
if not pm me your address

**Wed Jun 04, 2008 3:52 pm » Post: #7 » Download Post**

hi it can be converted. adaptor called little yellow box, available from
bike torque racing. can also recalibrate for changes in gearing easy fit
3 wires to join in to sprocket sender harnes cheers.