MC28 HRC loom

**Sun Nov 04, 2007 8:51 am » Post: #1 » Download Post**

Guys

a friend of mine just imported an MC28, looks like the bike is used in track. and it has an MC21 clocks and is missing the PGM.. Also it look that has no light plugs on the loom and the plugs of the PGM have 3 connectors. 2 small grey and 1 big white. Which PGM is to look for?

thanks

**Sun Nov 04, 2007 11:16 am » Post: #2 » Download Post**

Demetris hi...

This is the HRC wiring harness that this bike has been equipted...You will have to get an PGM III unit for this bike and also propably an HRC delimiter box...
mixalisen

**Sun Nov 04, 2007 5:31 pm » Post: #3 » Download Post**

But the end plug of the loom has 3 connectors, PGMIII has 2 big ones???

**Sun Nov 04, 2007 8:17 pm » Post: #4 » Download Post**

The HRC delimiter box has one big plug and two smallers(grey)...The big one must be plugged to the PGM unit and the two smalls to the wiring harness...The HRC wiring harness work only along with the HRC Delimiter Box...

**Mon Nov 05, 2007 8:03 am » Post: #5 » Download Post**

Thanks a lot mate

that is clear now

**Mon Nov 05, 2007 12:28 pm » Post: #6 » Download Post**

Got some photos of the loom.

http://www.motorcyclelane.com/hrc%20loom.jpg
http://www.motorcyclelane.com/hrc%20loom2.jpg

I gues then we have to find an HRC delimiter box and a PGMIII in order to run this bike