clutch basket

**Tue May 22, 2007 10:58 am » Post: #1 » Download Post**

Does any body know where I can get Aluminium clutch basket and inner hub from?

If not I have found an engineering company that may produce some.
_________________
MC21 SP

**Tue May 22, 2007 11:07 am » Post: #2 » Download Post**

For which model? There are 4 types of basket and 5 types of inner.
_________________
If I have to take the carbs off once more...

**Tue May 22, 2007 12:08 pm » Post: #3 » Download Post**

Well for me personal it's MC21SP as my signature suggests. The guy I've spoke to says that making them isn't a problem as usual it all comes down to money.
_________________
MC21 SP

**Tue May 22, 2007 12:21 pm » Post: #4 » Download Post**

If your just after the stock '21 SP basket and hub then Honda will be able to supply them as they are still in stock. They arnt even that much if memory serves.
_________________
If I have to take the carbs off once more...

**Tue May 22, 2007 2:02 pm » Post: #5 » Download Post**

I think I just paid about $125 for the basket and about $50 for the hub.
_________________
james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm

**Tue May 22, 2007 3:21 pm » Post: #6 » Download Post**

yes you can still get the originals but I've just broken one so figured why not go for it while I've got to spend money anyway
_________________
MC21 SP

**Wed May 23, 2007 1:29 am » Post: #7 » Download Post**

The stock design is good, but just a little heavy. Why not take the stock piece to the CNC shop and get it machined out of billet 7075, then you can skinny it down to half the weight.

It's only money. Make some more tomorrow.

**Wed May 23, 2007 10:00 am » Post: #8 » Download Post**

Matt your definately on my wave length with this
_________________
MC21 SP

**Wed May 23, 2007 1:34 pm » Post: #9 » Download Post**

Makes a change for me to be on anyone's wave length Confused

**Wed May 23, 2007 7:39 pm » Post: #10 » Download Post**

What he really needs is a "Mr. Matt" clutch, or an Andy F3 clutch or even an MC18 F3 clutch. Failing all of those and the CNC shop a NSR-World Lightened clutch basket.
_________________
If I have to take the carbs off once more...

**Thu May 24, 2007 1:08 am » Post: #11 » Download Post**

Steve have you been looking at my crutch....I mean clutch again?!

My clutch is a lot of messing around. Cutting this, welding that, trimming bushes down, making new shafts and pushers, hardening and tempering.....

Andy's F3 clutch. Well, let's not go into that 'cos he's the only bugger outside HRC that's got one Mad

MC18 F3 clutch. Still haven't seen one Steve, but sounds good all the same.

NSR-World lightened clutch. Ahhhh, now that's an easy one. Probably the best compromise.

**Thu May 24, 2007 1:32 am » Post: #12 » Download Post**

So it's only 5 minutes since my previous post and I've now seen the MC18 F3 clutch.

Brother Stephen sent me some pics and I of course replied to his email in the nicest way possible Mad

Looks rather trick and would definitely be an improvement on stock.

**Thu May 24, 2007 10:27 am » Post: #13 » Download Post**

nsr-world lightened clutch didn't know this was on offer anymore details
_________________
MC21 SP

**Thu May 24, 2007 5:07 pm » Post: #14 » Download Post**

Thats because we dont advertise it Wink

Dry clutch models only of course.
_________________
If I have to take the carbs off once more...

**Fri May 25, 2007 3:20 am » Post: #15 » Download Post**

Blimey, Steve must be proud of that 'cos he's given it the red carpet treatment Laughing