I've had this site for ages on my PC, but just noticed that they stock, or can order Jha parts....

Could be easier than dealing with direct for some people.

http://gpcmoto.com/frames/newdefault.htm
_________________
NSR300R - Why did i ever have a 250...

Well, not wanting to get ahead of myself, but after the recent talk of "special tools" etc., I've been talking to Jha, and they are considering letting us sell some of their stuff through the Marketplace so as to make it more readily available to more buyers. (Japan is a pain in the ass to buy from for anyone outside the country!)

I've only enquired about a few parts such as the base nut wrench and MC21/MC28 jet kits etc., but it's looking hopeful.

I'm just waiting for them to work out some prices/details for me, then I will let you all know. They sounded very positive, and very helpful, but remember it's getting real close to the beginning of the season, so it may take a while! If you're thinking you'd like some Jha parts though, just hang on a short while, and just maybe I can make them available soon!!

Please post the kind of things YOU WOULD SERIOUSLY LIKE TO SEE AVAILABLE AND WILL BUY, as I will only get one shot at this! They have far better things to do than run around sorting us a deal out only to never see an order and think I've wasted their time!

Watch this space!!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

That's cool. I think the jet kits are probably on the top of most peoples list. Pipes and engine parts from them ar ususally a bit too much... The special tools are a bonus definatley!
_________________
NSR300R - Why did i ever have a 250...

http://gpcmoto.com/frames/newdefault.htm

No love for 18's tho
_________________

88 NSR250 R2J (work in progress!) & 05 Aprilia SL1000 Falco

Andy, how about:

-stiffer clutch springs
-shift detent spring
-doesnt JHA sell a high performance dry clutch plate kit?
-kickstart shaft hole blockoff plug
-oil injector blockoff plate

Those are small items that wont break the bank, and I think alot of people would want them.
_________________
Paul Herr
'88 FZR4/GSXR/YZF Frankenbike
MY BIKE PICS

We can already do F3 springs (although at the moment, only list them as part of the full clutch kit), or if you want to get really silly, some very strong springs, but they make your hand ache round town!!

We can also do the shift detent spring.

We already do an uprated clutch kit, but could maybe offer a Jha one if it's still available too, even if it was just for the sticker!!

I can do the HRC kickstart and oil pump blanks. I'll talk to Charles to see if he still has any oil pump blanking plates still as he was selling them a long time ago.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

andy if you have a kickstart and oil pump blank i can use as a template i can have them lazer cut

The kickstart part is a "blank" seal.

I have a bottom end with a Blue Fox oil pump blank on it. I'll take it off and send you a plan. It's only a small alloy plate.


_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

no probs andy that looks fine you will have to let me know how many you will need and how thick the plate is, is stainless ok

I ordered my parts from JHA direct in Japan (much cheaper than padgetts or any UK supplier), had to do a bank transfer in the local branch but other than that there was no probs, they always respond well to emails in english and sort out the postage prices etc for you.

Would be easier if you could buy from Andy though as it saves the hassle of the bank transfer of funds etc.

i have a kickstartblank (bought 5pc. some years ago), original Honda/HRC... if anyone intrested....
_________________
nsr300se rs250r´05 ns-1rr

drschneider wrote:
i have a kickstartblank (bought 5pc. some years ago), original Honda/HRC... if anyone intrested....

Sorry, is this Classifieds? I don't think so. It's discussing what would be welcomed in the Marketplace.

If you've got something to sell, put it in Classifieds or on eBay, but don't take the piss out of me!

If you want to fund the Site and the Forum, then feel free, as it is, the small amount of sales and some of the more generous Members' donations are all that's keeping the Site online at the moment.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

As discussed, I think brake and clutch levers should be avaliable for those of use that spend more time gravel trapping than track daying
_________________
If I have to take the carbs off once more...

If you've got something to sell, put it in Classifieds or on eBay, but don't take the piss out of me!

If you want to fund the Site and the Forum, then feel free, as it is, the small amount of sales and some of the more generous Members' donations are all that's keeping the Site online at the moment.

whats that??? why are you going so bad?
if i want to sell something of course i take it in the classified.... do you think im going rich with a blank for 20 pennnys?
The discussion was about that blank and i only told that i have one if anyone is searching for that... so what....
I look 2-3 times a week in this forum and tried to understand the most of the adds with my bad english... not easy for me, but if i have to read so unfriendly things... i cant understand that for somthing like this....
but, youre the boss, you will know whats right on this site......
_________________
nsr300se rs250r´05 ns-1rr


Last edited by drschneider on Sun Jan 29, 2006 10:46 am; edited 1 time in total

I feel some tension in the air...comeon guys you're supposed to be EU buddies now
_________________
'87 MC16