Can anyone clarify which spacers are fitted to a mc21 r model rear wheel spindle
Coming to put mine back together and I think I am missing an outer spacer on the disc side - should there be one sat in the dust seal like on the sprocket side? Bit lost with the parts diagram not sure if it is 42312 kv3 700 or 770 I need? And does anybody have a spare or know where I can get one? thanks all

Yes, there should be a captive spacer on each side. It doesn't matter if you use 42312-KV3-700 or 770. If you have the one on the sprocket side, you can just get it copied by a local engineering firm.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

David Silver spares is offering the -770 variant as a special order part for about £15 👍

Thanks for the answers both. Yes i have the other side so can use that to copy if needs be ta