Gear oil change

**Wed Jun 10, 2020 2:02 pm » Post: #1 » Download Post**

Hi,
I just got a nsr mc21 se and want to change the gear oil, is the bolt near the 2t oil pump where to fill the gear box?
Thanks, Davide

**Wed Jun 10, 2020 2:21 pm » Post: #2 » Download Post**

it should be on the right hand side of the engine. its the Big plastic screw. make sure you fill the bike up when it is level and not on its side stand

**Wed Jun 10, 2020 2:24 pm » Post: #3 » Download Post**

oh and welcome to the forum Very Happy

**Wed Jun 10, 2020 2:43 pm » Post: #4 » Download Post**

Thanks

**Wed Jun 10, 2020 6:34 pm » Post: #5 » Download Post**

prelude2.2 wrote:it should be on the right hand side of the engine. its the Big plastic screw. make sure you fill the bike up when it is level and not on its side stand

To what height Prelude? Where should the oil sit roughly?

Cheers
max

**Wed Jun 10, 2020 6:47 pm » Post: #6 » Download Post**

Its been a while so someone please correct me if i am wrong but it takes .7L if i remember correctly. Can anyone else confirm?

**Wed Jun 10, 2020 8:06 pm » Post: #7 » Download Post**

Hi "cbr929rr", and welcome to NSR-WORLD.

Here's the service manual page relating to the transmission oil.

*NOTE: We use and recommend Rockoil GRO in dry clutch transmissions.

Levels:
0.7L on oil change
0.8L on rebuild
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!