300 KIT PIPES

**Sun Oct 31, 2010 4:05 pm » Post: #1 » Download Post**

I am so

, finally got my special pipes .

http://www.bikepics.com/pictures/2089650/

going to the dyno on saturday Very Happy

**Mon Nov 01, 2010 4:12 am » Post: #2 » Download Post**

Hi Neal, is it true there alot of parts for NSR MC28 in Sth Africa?...Saw alot of parts or bike that is shipped to Sth Africa...

Any shop that can do shipped parts international?

**Mon Nov 01, 2010 4:26 am » Post: #3 » Download Post**

Hi , there are many mc 16 , 18 and 21 here. The prices are cheap as most of them have been crashed or neglected by youngsters . Parts are cheap .
There are some 28's but normally they are in a decent condition .
We do have guys that will ship parts to you .

**Mon Nov 01, 2010 5:22 am » Post: #4 » Download Post**

awesome bro, i look forward to the dyno results!

I was finally able to have a proper head to head run with an SV650 (pro-twin) race bike at the track at the weekend and found, to my delight, that the 300 is a perfect match in a straight line: even gaining a few inches in the slip stream. And all whilst running massive, safe mains, pump fuel and 'standard' porting and all the rest. I'm so pleased with it!
_________________
After years of moaning about immigrants now i am one...

**Mon Nov 01, 2010 11:32 am » Post: #5 » Download Post**

Any used parts, complete meter set & CDI that comes with cards?...Can you check the price please?
Any used race parts available that in good condition?

**Mon Nov 01, 2010 2:14 pm » Post: #6 » Download Post**

Max, please make these enquiries via PM (Private Message), not in the Discussion area.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon Nov 01, 2010 6:15 pm » Post: #7 » Download Post**

Hi Hermit ,

good to hear that the bike is going well ! What else is there to do on your bike to make it faster and pass those 4 strokes Razz

I will paint a clear coat exhaust paint on the pipes to try and keep them looking trick .

Having some carbon cans made this week .

Max , send me a pm .

**Tue Nov 02, 2010 3:38 pm » Post: #8 » Download Post**

Sorry Andy & Neal, 1 pm sending

**Wed Nov 03, 2010 4:23 pm » Post: #9 » Download Post**

Neal wrote:I am so , finally got my special pipes .

http://www.bikepics.com/pictures/2089650/

going to the dyno on saturday

Nice work, I love the looks of mild steel and autogenous gas welding.
Keep in mind to use a good quality high temp clear coat that is silicon-based, it will last much longer than conventional ones...
_________________
2t-racelab.com

**Thu Nov 04, 2010 6:56 pm » Post: #10 » Download Post**

I picked up my silencers today and took the bike for a test ride . It made me Very Happy

http://www.bikepics.com/pictures/2092416/

What do you think of the cans ?

**Fri Nov 05, 2010 4:24 am » Post: #11 » Download Post**

they look sweet bro, post up some shots of the whole machine when she's fully re-assembled for us to drool over! Cool

_________________
After years of moaning about immigrants now i am one...

**Fri Nov 05, 2010 4:41 am » Post: #12 » Download Post**

sure no problem , all set for dyno tomorrow morning .

**Thu Nov 11, 2010 7:35 pm » Post: #13 » Download Post**

http://www.bikepics.com/pictures/2096375/

tyga pipes vs custom pipes with a splutter at top end , new plugs installed now and it revs clean

**Thu Nov 11, 2010 10:25 pm » Post: #14 » Download Post**

Really nice power. Cool

**Thu Nov 11, 2010 10:29 pm » Post: #15 » Download Post**

Very nice grunt indeed!

300 KIT PIPES

300 KIT PIPES

Re: 300 KIT PIPES