Hi There can anyone help me out with a VGC dry cluch cover?/? OE prefered or performance one Tyga etc ??? also has anyone got the Front disc rotor nuts & and bolts for magtek wheel ? please help,thankyou,jonmac
_________________
John

If your really struggling then they are all still available from Honda.

Is there anything special about the bolts except for m6 x 120?

Lings Honda price for the clutch cover is £75.00 + VAT, ouch!

I've got one somewhere Jon, I'll see what the condition is like.
_________________
Rich
MC21 Track Bike / RS250 NF5 'Spencer', NX5 'Cadalora' & NXA 'Aoyama' / RS500 / Two Brothers Racing RC30

I need one as well if any come up after Jon is sorted....condition not as important but the better the better if you you know what I mean

As for the bolts...is there anything special or can we just source any of the correct length and diameter? I am guessing any stainless steel ones that can b found really easily would do the job.

I have a spare stock Honda dry clutch cover in mint condition but freight from New Zealand may be a killer.

Will do it for half new price incl VAT(20%?) + freight

PM me an address and I'll enquire at the post office tomorrow as I'm there sending a steering damper to another guy....

Also have stock MC28:

Handle bars
headlight
indicators (mc21)
Top tripple clamp
flywheel
reed assy
steering stem nut
Rear wheel (non magtek)
2x clutch lever
1x brake lever

Thanks - ps not super keen to sell rear wheel!
_________________
Stop sniffing my ring

MC28SP
KLX110 hotrod
CAG Minimoto
1997 WRX
21 Speed Bike
162 Smurfs

Hey Joe,Richard G is looking in his vast stock he is sure he has 1 in VGC if not i will get back to you,thankyou,jonmac
_________________
John

I am looking for a dry clutch cover also..

I just bought mine from Tyga. Looks great, great price too. I love the sound of that clutch. Makes me sing Jingle Bells.

$65 USD http://tyga-performance.com/site/product_info.php?cPath=71_534_709&products_id=1408



RZ Rob

RZRob1 wrote: I love the sound of that clutch. Makes me sing Jingle Bells.

_________________
It's Good to be Bad!

watfordhorn wrote:As for the bolts...is there anything special or can we just source any of the correct length and diameter? I am guessing any stainless steel ones that can b found really easily would do the job.

I put stainless steel on my last bike as I had to drill the bolts to get the disc off. When I took it for MOT they told me off saying they should be High tenstile steel bolts with the little shroud

Sorry I'm assuming here you're talking about the front disc bolts - if not please ignore