Hi everybody, and sorry for my english

I have an mc28 SE, and i just buy a magtek wheel from mc28 sp,
but they are differents!
my se wheel has a few small grimaces to be able to lodge the screws, but the sp does not have them, it will be sufficient to be able to do these grimaces or I will have to change some piece more?,

still(yet) I have not dismantled anything

thanks

I'm sure your English is better than my Spanish so don't apologise, you have nothing to apolgise for

Do you mean the bolts that hold the front brake discs on?

On a Magtek it's a long bolt that goes right through the wheel with a nut on the other end;

See? Parts 13 and 14.
You want 6 x 90105-KV3-720 (that's the bolt)
and 6 x 90301-473-003 (that's the nut)

Be very careful here, the on line manual is wrong and these bolts are expensive.

On a normal wheel it's just small bolts that thread into the wheel;

See? Part number 11.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread


Last edited by fontyyy on Sun Feb 15, 2009 9:39 pm; edited 1 time in total

Thanks Fontyyy,
You have made me see a problem in the front wheel that I was thinking that I don't have

I had realized the back that has some embed different.

My original wheel:


My new Magtek:


I don´t know why are the differences, I´m looking for the differences, but I don´t find it.

hey people, do me a favor.

I dont give a sh*t if you link to images in the forums. But if your going to link to images that Andy and I worked our asses off getting scanned in, cleaned up and host for you all, please dont copy then onto other services like "Bikepics.com" and "photobucket.com".

Simple right click on the frikin images in the parts manual, select copy URL and past it into your post!

thanks.
_________________
Charles Gallant

And I still get e-mails asking why I'm not busting my balls to complete the MC16~21 English Workshop Manual... yeah, I wonder why?!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Sorry for the photos,
I only know up photo by photobucket ,
if it´s a problem, just tell me and i edit my message,

and sorry because i don´t understand completely what you say,
and i don´t use my translator very much, because, for example, it translates HRC for Human Rights Corporation

Pedro (and fonty),

Instead of copying the images from the parts manual area to PhotoBucket or BikePics and then using the URL from PhotoBucket or BikePics, Use the URL from the Parts Manual area.

if you right click on an image and select "Copy Image URL" or something like that depending on the browser you are using, then past that URL into the post rather then the PhotoBucket or BikePics url.

This way the images stay on the NSR-WORLD.com (and NSR250.net) sites.
_________________
Charles Gallant

Preferred...
[img]http://workshop.nsr-world.com/11kv3lj7/2FK11KV3LJ7/Pic/H4.jpg[/img]

Not what we like to see...

[img]http://i291.photobucket.com/albums/ll290/Pedro_ktm/Traserase.jpg[/img]

[img]http://w4.bikepics.com/pics/2009/02/14/bikepics-1570948-640.jpg[/img]

Especially when watermarked with another domain's name.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Shame on you Fontyyy!
_________________
If I have to take the carbs off once more...

Will part 2 from your standard rear wheel fit your magtek rim?

Are you talking about the plates that are attached on the inside and outside of the Magtek wheel mounting area. That's the only piece that I don't see listed in the schematic.

Really?

I can't right click the image, you've blocked it and the url from the parts manual is always just http://workshop.nsr-world.com/ ;


I'm trying to explain how something is to someone who barely speaks the language, I didn't think;

"Click the parts manual on the left hand side, use the mc21sp (NSR250R8L) manual, the mc28 SP manual front wheel page is from the SE model, then navigate to page H4, now you see parts number 14 and 15 in the picture (which are actually parts 12 and 13 in the list) compare that to page H4 in the mc21r (NSR250R7L) manual"

was really going to be to readable to him.

So copying the page to bikepics and linking it is the only way to link the picture, I'd much rather link the pic from the forum, it'd be far easier, as it is that post took the best part of half an hour to sort out as opposed to the 5 minutes it would if right click wasn't blocked.

I am aware of course that there are other ways of getting the image URL out, but as you've actively chosen to hide it I didn't try to find a way around the code.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread


Last edited by fontyyy on Sun Feb 15, 2009 10:17 pm; edited 2 times in total

Aren't those images Honda property anyway?

apexxn wrote:
Aren't those images Honda property anyway?

Might have known you'd have something to say about it!

Yes, the original images are Honda, and they are credited on the opening page. There's also a credit on the wiring diagram along with NSR-WORLD.COM in the Workshop, which someone was quite happy to steal, erase the HONDA/NSR-WORLD.COM, and post on another website intimating it was their work.

It still takes the piss when people do not take into consideration the many hours put into the site and the forum.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

apexxn wrote:Aren't those images Honda property anyway?

And you will notice on the parts manual, it states the images are honda's.

Im not saying people can't copy them cause they are copy right, but asking to respect the fact that Andy and I spent the time to scan the images in, clean them up and host them to support the community. if you would rather you not have us host the parts manual because they are Honda's property, we can take them down.

That's what I thought

As for right clicking? I use chrome and it works. Guess Andy's little java code only works with IE
_________________
Charles Gallant