Wanted mc18 speedo drive bits

**Tue Apr 29, 2008 6:40 pm » Post: #1 » Download Post**

Inc magneto cover and cable.
So i can start to sort out a working speedo on my mc16 300/nc30 front end!
Mot has run out and i cant be arsed to refit original forks to get a new one.
Cheers Rob

**Tue Apr 29, 2008 10:07 pm » Post: #2 » Download Post**

Cant you just fit a pushbike style one? Probably easier and should pass an MOT. If fact if the speedo is mounted on the bike I doubt they will fail it, they wont side it so how will then know it doesnt work?

Just a thought!

**Tue Apr 29, 2008 10:22 pm » Post: #3 » Download Post**

I thought about it Leigh,but i would prefer to do it properly with nsr parts,i can modify output shaft of my spare engine,so it wont be too much of a headache to do.
Cheers Rob.

**Wed Apr 30, 2008 10:39 pm » Post: #4 » Download Post**

They'll pass it anyway, my race 28 passes (with no speedo, HRC loom, I just give the the honda card to get a mileage, I've got three MOT's same milage exactly!) and all mc28's have a km only speedo anywa which is not legal.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Thu May 01, 2008 11:27 am » Post: #5 » Download Post**

I didn't realise that Fontyyy,I'll contact my shop just to make sure.
I still want to get my speedo working though,will mc21 bits fit?
cheers rob.

**Fri Jun 27, 2008 11:43 pm » Post: #6 » Download Post**

I have now modded my mc16 countershaft so i can run a mc18 speedo drive setup.So i'm still looking for mc18 speedo drive bits inc cable,so i can give Rob H his bits back Wink

i now have a magneto cover sorted.(thanks Rob H).
Also rk5 chainguard wanted.
cheers Rob