Hello i have a problem with my indicators .they flash to quick ( bike soon to be mot'ed) I think they must be aftermarket ones as they are clear lenses with orange bulbs, and the bulbs are 12v 10 watt ,when i put a 12v 21 watt bulb in they flash at the correct speed ,fine but the larger bulb wont fit in my lense body. can i add a resistor in the circuit to compensate for the lower wattage bulb and if so what value please ,any help welcome
thanks Malc
(soon to be on the road with a repsol mc21)
_________________
stone chips are the real trophies

Could you maybe look at getting a different flasher unit??

Are they LED or incandescent? If its LED you can either run a resistor or go with a digital flasher unit.
_________________
MC21 300R w/SE bits, Rossi 2001
MC28SE Silhouette Repsol

standard filament bulb fitted and dont wont to change the indicator body as they are the same colour as the fairng.I think i may be moding the unit to take the larger bulb .
many thanks Malc
_________________
stone chips are the real trophies

Hi I think a 7.5 ohm resister in line with each side will bring the power back to about 40 w per side .