Racer latest...

Tue Jan 23, 2007 3:31 pm » Post: #1 » Download Post

Sometimes you just strike lucky...



That'll be an HRC transmission with optional gears going in the Racer then - not bad for a tad under £50! I wouldn't sell it for less than 5 times that!!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Tue Jan 23, 2007 3:38 pm » Post: #2 » Download Post

I suppose, if I was feeling particularly benevolant, we could throw one of these in too...



Who knows?!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Tue Jan 23, 2007 3:41 pm » Post: #3 » Download Post

Tue Jan 23, 2007 5:56 pm » Post: #4 » Download Post

You`ll want to sling away all the high ratios then!
You can always use them as door stops!

Tue Jan 23, 2007 6:20 pm » Post: #5 » Download Post

Well, we were thinking of building up 3 different close ratio transmissions now, as we can change one in about 10 minutes.

It's just handy to have the choices over just swapping sprockets and hoping for something that sort of works!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Tue Jan 23, 2007 6:28 pm » Post: #6 » Download Post

Re: Racer latest...

Tue Jan 23, 2007 9:00 pm » Post: #7 » Download Post

Andy wrote:Sometimes you just strike lucky...



That'll be an HRC transmission with optional gears going in the Racer then - not bad for a tad under £50! I wouldn't sell it for less than 5 times that!!

So wheres the HRC gearbox angle grinder Would'nt it fit in the picture

_________________
Harley Davidson is the worlds most efficient way to turn petrol into noise without the harmful side effect of horsepower.

Tue Feb 06, 2007 9:47 am » Post: #8 » Download Post

Just got my MC21 F3 shock too so will be fitting that today if the weather stays nice.

Full alloy body, compression and rebound damping, ride hight adjustment... and its pukka HRC!


_________________
If I have to take the carbs off once more...

Mon May 21, 2007 9:49 pm » Post: #9 » Download Post

The Racer breaks cover today, but is still a little shy!



First fire up of the motor today. New boots fitted, nearly ready for it's first test run on the dyno.

Sounds crisp!

More images to come later!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Mon May 21, 2007 9:56 pm » Post: #10 » Download Post

A real Silver Dream racer then!

The Stig`s not David Essex, is he?

Mon May 21, 2007 10:00 pm » Post: #11 » Download Post

We should paint the tank red, eh?!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Mon May 21, 2007 10:25 pm » Post: #12 » Download Post

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!


Last edited by Andy on Mon May 21, 2007 10:29 pm; edited 1 time in total

Mon May 21, 2007 10:28 pm » Post: #13 » Download Post

Looks good, sounds even better! We were both grinning today
_________________
If I have to take the carbs off once more...

Mon May 21, 2007 10:46 pm » Post: #14 » Download Post

Mon May 21, 2007 10:50 pm » Post: #15 » Download Post

Seeing as you were going on about weight saving so much Stephen, I'm surprised to see you're still using the original seat foam which has got to be made of dark matter incased in lead it's so heavy!
_________________
NSR300R - Why did i ever have a 250...