Wanted mc21 /18 parts

**Mon May 14, 2007 7:39 pm » Post: #1 » Download Post**

mc 21 radiator or rs 250 Laughing

mc 18 rk5 swingarm
mc18 r2j rear caliper bracket
mc 18/21 top yoke
mc 16 rear cowl!!!!!!!!!!!! Mad

any help finding these parts appreciated,
cheers Rob.

**Mon May 14, 2007 8:03 pm » Post: #2 » Download Post**

Don't forget there is an MC16F3 cowl on its way Rob!

I can do you an R5K swingarm soon, and probably an MC18 top yoke too.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon May 14, 2007 8:09 pm » Post: #3 » Download Post**

Don't forget there is an MC16F3 cowl on its way Rob!
I know mate,this cowl is for bike i'm using at the moment to replace the one with brown tape holding it in place at the back Embarassed

**Mon May 14, 2007 8:11 pm » Post: #4 » Download Post**

Got a full set of Campsa bodywork. It's far from mint, but it looks OK. It has been a long time since I saw it all in one place together though, but I will try and sort it out if you are interested?
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon May 14, 2007 8:24 pm » Post: #5 » Download Post**

i'm alright for bodywork at the moment thanks Andy apart from this bloody rear cowl and possibly a screen,i'm just trying to tidy up the bike i'm riding to Beuleigh.
All the rest of bits needed are for my ongoing 300/16 project along with f3 cowl and 80's sito pons race paintjob Very Happy

**Thu May 17, 2007 1:14 pm » Post: #6 » Download Post**

Rob I've got an 18 swingarm complete if you need it still. Not sure which model though!
_________________
NSR300R - Why did i ever have a 250...

**Thu May 17, 2007 5:39 pm » Post: #7 » Download Post**

Hi maxim,if you could check for me mate that would be good,i only want later mc18 swingarm so then i can run the wider tyre,although if you have earlier type maybe you also have earlier rear caliper carrier to suit which i need,
cheers Rob

**Fri May 18, 2007 5:21 am » Post: #8 » Download Post**

I know I have more than one R5K/R6K swinging arm if you end up struggling for one.
_________________
If I have to take the carbs off once more...

**Fri May 18, 2007 5:35 am » Post: #9 » Download Post**

Thanks Stephen i'll wait for maxim to get back to me then as he offered first, i'll let you know.
Rad and yokes are now sorted
cheers Rob

**Fri May 18, 2007 12:11 pm » Post: #10 » Download Post**

No worries Rob. lol I could even do you a frame to go with the arm lol
_________________
If I have to take the carbs off once more...

**Fri May 18, 2007 2:00 pm » Post: #11 » Download Post**

Thats the 2nd mc18 frame ive been offered Laughing

**Wed May 23, 2007 9:16 pm » Post: #12 » Download Post**

Hi Rob, sorry, I haven't checked this in a while!

I have no idea which model it is...? Not hot on my MC18 knowledge I'm afraid. How do you tell? You can have it for a tenner though whatever!
_________________
NSR300R - Why did i ever have a 250...

**Wed May 23, 2007 10:02 pm » Post: #13 » Download Post**

earlier swingarm type is more like ally box section tubing with square bracket welded on top for rear caliper mount
Later type is nicer shaped brushed ally finish with 2 line detailing down the sides and rear caliper mount is by torque bar.
Oh and just found out i'm going to the tt so no brands 250 for me Very Happy

cheers rob

**Wed May 23, 2007 10:09 pm » Post: #14 » Download Post**

beakergixer750cc wrote:i only want later mc18 swingarm so then i can run the wider tyre
cheers Rob

You can use a wider tyre on the mk1 18 swinging arm with no problems.
_________________
Harley Davidson is the worlds most efficient way to turn petrol into noise without the harmful side effect of horsepower.

**Wed May 23, 2007 10:15 pm » Post: #15 » Download Post**

Thats handy to know thanks wayne,i do prefer the look of the later type though