I need to replace the stock right hand clip on that was bunged up years ago. Is there a aftermarket replacement that will work with all of the stockcontrols that is lighter maybe alloy? Or is simply replacing with stock the way to go? Thanks in advance.
_________________
'93 MC21 250sp Repsol "Doohan"

What is the diameter of the fork? I use Gilles GP Light. The bar is removeable from the clamp but non adjustable set at 6 degrees I think. RRP is around £99 depending which model will fit.
_________________
http://www.rgv250.co.uk
http://www.thetuningworks.com

NSR leg is 41mm OD
_________________
If I have to take the carbs off once more...

your in the USA right?

Cool then look here

http://www.nsr250.net/forums/viewtopic.php?t=2793&highlight=clip

and then here

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4598291371&sspagename=STRK%3AMEWN%3AIT

$99 and they where ace, you can adjust the pole to suit! Im sure if you look up the seller he'll have some more, and yes they fit a 21

Cheers

RC46...Thanks, They should do the trick! Nice work-

Michael
_________________
'93 MC21 250sp Repsol "Doohan"