mc16 rc servo troubles

**Tue Mar 06, 2007 10:44 pm » Post: #1 » Download Post**

I cant believe it,bloody things playing up again Mad

switch bike on,servo working blip throttle a few times valves open and shut ok then it goes to the closed position and stays there until i switch ignition off then on seems to work ok as above and then stops again:x

**Tue Mar 06, 2007 10:48 pm » Post: #2 » Download Post**

Again!!

What you need is a nice MC16 F3 electrical set Wink

On a more serious note, does it still run ok when riden?
_________________
If I have to take the carbs off once more...

**Tue Mar 06, 2007 10:56 pm » Post: #3 » Download Post**

servo unplugged,valves fully open,slip clutch a little to get going,and she goes very well indeed,its just annoying because servo works at first then stops i'm thinking rc control unit as my spare servos act the same!

**Tue Mar 06, 2007 10:59 pm » Post: #4 » Download Post**

It could simple be a duff servo controller. The controller on the MC16 is a seperate box, and you should be able to pick one up cheap somewhere.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Mar 06, 2007 11:00 pm » Post: #5 » Download Post**

that means im gonna need 2 then Wink

**Wed Mar 07, 2007 12:00 am » Post: #6 » Download Post**

There was an MC16 RC valve controler on ebay last week going for £10 I think. Might still be there.
_________________
If I have to take the carbs off once more...

**Wed Mar 07, 2007 12:33 am » Post: #7 » Download Post**

I dont remember seeing that stephen,its definately not there now Sad

**Wed Mar 07, 2007 6:02 pm » Post: #8 » Download Post**

ive got a spare one for a tenner.
Also got servo units and cdi's

**Wed Mar 07, 2007 6:30 pm » Post: #9 » Download Post**

cheers Liam pm sent Very Happy