Any experience? My PGM II won't run the RC Valve and 2T Racelabs says this is a common fault which they can repair. They can also refurbish the whole PGM unit. This strikes me as a better option than buying another used unit from Yahoo Japan at similar cost. They have good ebay reviews but I would love to hear from any forum members with experience.

Not had one repaired myself by Nick, but have had dealings with him with no problems, a good friend of mine, johnmac, a member on here has had several repaired succsesfully by Nick.
_________________
Proud Father of , 05 ktm 400exc supermoto 2018 honda crf rx supermoto

Thanks Les!

I've not used him myself (he wouldn't support NSR-WORLD members back when he tried advertising services on here), but know others who have without any issues.

I'm not sure if he offers "internal derestriction" for the PGM-II [as he does for the PGM-III], but this modification is something I would strongly advise against if offered to you. Stick with the wire-splice as per the 250 Tuning section of the main site, as it's completely reversible.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Note to self don't get on Andy's bad side cuz he'll never forget.

prelude2.2 wrote:Note to self don't get on Andy's bad side cuz he'll never forget.

I thought the same