Hiya,

I've just picked up a NSR250R SP 89, it was in a state of disassembled when I bought it and I'm looking at sorting out the solenoid for the carburetor vent(s) . What I'd like to know is , how many should I have, is it 1 or two solenoids. And where do I plumb the feeds onto the bottom of the 2 barbs on the bottom of the solenoid. Does anyone have a diagram of where I need to put some vacuum line in? I think the bottom barb goes onto the carbs onto one of the T pieces but is the top just to atmosphere?

Thanks

John

Hello John, and welcome to NSR-WORLD!

Here are the diagrams from the MC18 Service Manual...

https://tech.nsr-world.com/nsr250/mc18/1989-mc18-air-correction.php

You can also view our Honda approved English Service Manual in the Members Content area...

http://nsr250.net/forums/members

Specific pages:

http://nsr250.net/forums/members/nsr250r_manual_mc16_18_21/index.php#p=350
http://nsr250.net/forums/members/nsr250r_manual_mc16_18_21/index.php#p=366
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!