Ar screw info

**Tue Jul 28, 2020 3:08 pm » Post: #1 » Download Post**

Thanks for looking at my post.

I have checked the schematic of the carb and I only see two components for the air screw....the screw and a spring...can I check this is right? Is there not an o ring somewhere to keep it airtight?

Cheers for any info
Max

**Tue Jul 28, 2020 5:36 pm » Post: #2 » Download Post**

No, there's no O-ring.

There's an O-ring on some carbs, sometimes on the needle, and sometimes in a recess on the carb body. There's also one in a diagram on the main site (which I drew about 20 years ago), which really pisses some people off, so I leave it there just to annoy them! ROTFLMAO

Maybe I will change it when the new site goes live.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!