Primary gear holding tool

**Sun Jan 26, 2020 2:33 pm » Post: #1 » Download Post**

I bought on to rebuild my engine.. again!
Works very well

bank of the ozarks nyc
_________________
Why do things simply when you can complicate them

**Sun Jan 26, 2020 6:44 pm » Post: #2 » Download Post**

Thats cool I might have to get one of those. I normally use a two pence piece to lock the gears.

Why have you had to rebuild the engine again?

**Sun Jan 26, 2020 10:26 pm » Post: #3 » Download Post**

paul g wrote:
Thats cool I might have to get one of those. I normally use a two pence piece to lock the gears.

paul g wrote:
Why have you had to rebuild the engine again?

Probably the sheer amount of mileage Rob does! A credit to the community! Very Happy

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Thu Jan 30, 2020 10:06 pm » Post: #4 » Download Post**

Phil and I had similar over revving symptoms when starting our bikes. Leak down tests both failed. Phil's rebuild and retest was good. Mine's nearly stripped down again. I'm planning on putting my original crank back in, now it's been rebuilt
_________________
Why do things simply when you can complicate them