Hi Scott if you can get the box open remove locking mech and with a small flat screwdriver force the stainless steel lip that ticks under open enough to remove tumbler put your ign key in and file or belt sand tumblers till they are flat the lock will them work of that key with a small hammer on a hard cardboard,ply surface hammer the lip back down
I’ve done it a few times and it sorts it 👍
take your time good luck
jonmac _________________ John
I bought a lock set from fleabay. Cheap is one for word for it... However, after mod'ing the trunk lock so it actually latched and swapping the steering lock part on to the new set it actually works OK.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum