Mc18 rear shock

**Thu Sep 29, 2016 7:20 am » Post: #1 » Download Post**

Can anyone tell me if the rear shock from an mc21 will fit
a mc18 are they the same length????

**Fri Oct 07, 2016 6:32 am » Post: #2 » Download Post**

In short no a 21 shock wont fit

**Fri Oct 28, 2016 6:15 am » Post: #3 » Download Post**

Can u tel me if a mc16 will fit??? Or can u get Tony
To contact me over the shock he has I can't pm him thanks
Lee

**Fri Oct 28, 2016 8:27 pm » Post: #4 » Download Post**

I recently installed a Penske rear shock from an 08 CBR1000 into my MC16 and it's an almost perfect fit. needed a couple spacers, but the length was very close. I then installed the mc16 shock into my mc18 chassis and again pretty much exact fit. Will post pics later when I get home.

**Sun Oct 30, 2016 9:06 am » Post: #5 » Download Post**

Leedabs wrote:Can u tel me if a mc16 will fit??? Or can u get Tony
To contact me over the shock he has I can't pm him thanks
Lee

Hi lee, never had a 16 so cant comment but i have a R model mc18 shock left. Needs a refresh id say though

**Mon Oct 31, 2016 2:36 am » Post: #6 » Download Post**

tomzilla808 wrote:I recently installed a Penske rear shock from an 08 CBR1000 into my MC16 and it's an almost perfect fit. needed a couple spacers, but the length was very close. Will post pics later when I get home.

Interesting Smile

_________________
If the needle isn't bouncing off the limiter, it's not time to shift yet.

**Mon Oct 31, 2016 7:00 am » Post: #7 » Download Post**

pic of the MC18 chassis with the MC16 Shock in place and a 96 CBR600F3 wheel in place
[URL]

[/URL]

And the shocks side by side
[URL]

[/URL]

**Mon Oct 31, 2016 1:25 pm » Post: #8 » Download Post**

Hi yes interested in the stock shock can u contact
Me on 07624488828 please