Delete

**Thu Mar 30, 2017 12:33 pm » Post: #1 » Download Post**

Delete

Last edited by Javipop on Tue Oct 05, 2021 12:14 pm; edited 1 time in total

**Thu Mar 30, 2017 4:17 pm » Post: #2 » Download Post**

Are you sure the cable is lubed/moving freely?

**Fri Mar 31, 2017 5:02 am » Post: #3 » Download Post**

machine warmed up?

**Fri Mar 31, 2017 10:04 am » Post: #4 » Download Post**

yes the machine is warmed . I think the cable is in good condition and it is free movement

**Fri Mar 31, 2017 10:18 am » Post: #5 » Download Post**

Probably a dead crankshaft centre seal. Classic symptom on the 89~97 NSRs.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Mar 31, 2017 7:20 pm » Post: #6 » Download Post**

Andy I think you're right . You mean the two seals of the r crankshaft, the right and the left? . Do I have to disassemble full cylinders to change those two seals or can I access them from the side covers? Thank you and greetings.

**Fri Mar 31, 2017 9:43 pm » Post: #7 » Download Post**

No, I mean the centre seal. The seal integral to the centre main bearing.

Two recent examples we've seen.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!