Need a pair of forks for my NSR, will consider:
SP 18/21
RS RWU's
F3 (ha, yeah right)
NC30 (late)

Anything else that will fit really, stuff that's been 'tuned' all the better.

Before I go down the botch route and start messing with cbr600/vtr1000 insides mated to NC30 lowers.

What have ya?

Paul
_________________
More **** two strokes than you can shake a **** stick at.

Need to be RWU's to comply with the FE regs!

Thanks
Paul
_________________
More **** two strokes than you can shake a **** stick at.

I have some nc30 forks. I will check wha they are like later.

Awesome thanks!
_________________
More **** two strokes than you can shake a **** stick at.

Got my old F3 type RS/NSR hybrid things!

Like Steve built for his F3. They use '89 RS lower sliders with RS damper cartridges. Mated to NSR stanchions.
Use standard calipers and standard size disks.
Got some very good '89 RS front disks too.

PM sent mate!
_________________
More **** two strokes than you can shake a **** stick at.

Forks no longer wanted!

Thanks!
_________________
More **** two strokes than you can shake a **** stick at.

2Smoke wrote:Need a pair of forks for my NSR, will consider:
SP 18/21
RS RWU's
F3 (ha, yeah right)
NC30 (late)

Anything else that will fit really, stuff that's been 'tuned' all the better.

Before I go down the botch route and start messing with cbr600/vtr1000 insides mated to NC30 lowers.

What have ya?

Paul

Hi there i have a set with new gold inner tubes and seals for MC18 and i have a set of inner tube silver new

Hi there i have a set for MC18 with new gold inner tubes and new seals if you are interested ?
let me know

HI mate, got a set of NF5 forks thanks!

After some MC21 heads as per my other post though..

Paul
_________________
More **** two strokes than you can shake a **** stick at.