Depending how far you want to go.

On my F3/RS forks I removed the brass rebound damping adjuster from the fork top (It's quite easy to do) and turned the taper down 1.5 degs.

This gave it much finer controller. You can also then adjust, when rebuilding them, the range you want the adjuster to work in. I set mine so from fully seated to fully off I had a maximum of 12 clicks on each adjuster.

It's not as good a set up as the '90 or '91 forks Andy has but does the job more than well enough for me.
_________________
If I have to take the carbs off once more...