RichG wrote:
The ultimate plan:
HRC Race Wiring Loom and HRC Delimiter (ignition advance??)
Convert to Pre-mix
Remove standard Air Box
Run Open Carbs + Carbon Box Shield (from Andy)
VHM Heads
Triple Core Radiator (with modded cap to clear RVF forks)

You'll need the "delimiter" to run the HRC loom as it's part of it. It's got one of the PGM plugs on it.
Some people do splice this little harness into the stock loom rather than do the wire splice. I've not seen any evidence to suggest it does any more than the wiresplice does, it definately does do the wire splice for you, it may or may not do something else as well. Andy will tell you it does, but he doesn't run one himself and his roadbike makes more power than plenty of race bikes, read into that what you will.
Premix is worthwhile just for the ease of access to the motor.
Ditto for the airbox and carb access.
VHM heads are apparently worth while (if expensive).
A radiator is worth getting for sure, my racebike runs too hot (in the 70's) in summer.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread