But did you turn it off? My racebike will stay on until the battery is flat if you just pull the card out, but if you turn it off you need the card to turn it back on after about 15 seconds.
Whatever, something is still wrong as removing the card turns off a bike with the road loom, spliced or not.
There are three wires on the black connector that need connecting to ground rather than their respective connections, light green/red (neutral switch), green/pink (oil level indicator), green/white (side stand switch), the ground wire is green.
I would also suspect just unplugging those three items (neutal switch, oil level indicator and side stand switch) would also allow the HRC card to function as all that matters is that no signal arrives at the PGM from any of those items. On the race loom those wires aren't even there.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread