hello fontyyy, i tried leaving it without the card for 15 mins and display still remains on...and i still can start the bike...i didnt splice anything on the wiring as this was done by the previous owner so i haven't really seen how it is done (i.e. if it is similar to instructions in the tyga website)...i plan to look at the wiring but what am i exactly looking for? which color?
the ethos adapter card just instructs me to hook up the adapter blue/orange wire to the red card in switch wire, then hook up the red/blue wire to the red/black wire...then connect the ethos adapter plug to the pgm 4 box and then connect the original black plug on the pgm 4 to the ethos adapter...
thanks for your patience...i'm really no expert on this.