Cliff,
yes, it is sandable. The consistance is just like the stock plastic, so it doesnt sand easy. I like to use a good sanding block and 80 grit wet/dry to knock it down and level it, using light strokes (dont press too hard). Then graduate to 200 and onto 400 to get any sanding scratches out.

If you have surface scratches in the plastic with no cracks, you can sand them out the same way. The Honda plastic is very thick.
_________________
Paul Herr
'88 FZR4/GSXR/YZF Frankenbike
MY BIKE PICS