Andy wrote:You should identify the carbs first.

Check the Technical Resources section for standard carb settings.

Hey Andy, here's my specs:

Keihin TA-10A - D type (read of side of carb set)
MJ's - 115
SJ's - 35
PJ's - 2 blanks (blocked off with screw)
Float bowls heights - 11.75-12mm (instead of 13mm stock, will fix this)
Needles - Stock, non-adjustable
_________________
"Save a Tree, Eat a Beaver!"

http://www.bikepics.com/members/canflyboy/