You need to jack the front wheel clear of the ground, and fit a cable-tie (tie-wrap) to the stanchion (slider). Lower the front-end back on to the gound and then jack it clear again. Measure the distance between the cable-tie and the top of the fork leg for the sag.

What you are referring to is the ride-height.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!