Hi,

I am getting MC18 now, but in my town there is not shop you can buy a ready made BodyWork. So I decided to do it hand made. I have done it before on NSR 50. Why don't you try as well.

It is not an easy process, but is not difficult either. If you have a bit of fantazy and good hands you can do it.

1. Take a foam plastic, make the shape you like, and than by sand paper make the surface smooth.
2. Take epoxy glue and put it over the foam plastic, than glue on it a glass fabric. than again glue and again glass fabric. do 5 - 7 layers (depending on a fabric quality).
3. Than you have to put a putty on, also make it smooth with special sand paper and it is ready for painting.
4. Before painting, you take the inner part (foam plastic) out.

Than you have a exclusive bodywork.
_________________
Burn the soil, not the soul.