Has anyone seen a faulty PGM that still works with a stock card but not an HRC card? I have an MC28 that I have been trying to fit an HRC card to. I ordered the card did the wire splice per TYGA web site installed the card nothing. But the stock card still worked. Was told by dealer my connections were at fault. I re-did my connections and checked with an ohm meter. Still nothing. Was told my connections were still at fault. Ordered a HRC wiring loom installed it and still nothing with the HRC card and the stock card still worked. Sent the card back to the dealer they sent back to HRC. HRC said card is fine. Not too many components left with the wiring harness. Card, harness, and PGM. Harness and card are new PGM works great with old card. Is this possible? I cannot even swap out my PGM beacuse the cards are programed to my PGM. I am in the U.S. so my local dealer doesn't even know what an NSR is. Is there any way to check my PGM?
Please Help!!!
Jeremy