Hi Guys and Girls, After a lot of messing about and some help from Bad Baz, I've got my Mc18 working! After it not charging the battery, it was the rec/reg. I have got a new one, not a honda one as they wanted neally the same amount as my bike is worth! The only problem is there is only one red wire coming from the reg, and I have 2 wires to connect to a red and a red and black. To get it going of sorts, I have only connected to the red and black wire, but it seams to work and charge the battery, but now the bike can only be switched of by the kill switch! The key only switches off the lights! Any Help? Also It does seam to hold back at high revs, I checked the power valves and it was making a buzzing sound from the servo and when I move the cables it stopped and then it moved the power valves back and foward? I have disconected the servo and move the power valves to fully open, it seams to go ok if you rev it. It will not damage the bike?