Thanks Andy.
Is the spacer (#5) something that is likely wedged in pretty tight to the point that you can't really tell it is even there just by looking in from the outside? I ask because when I look at the left (intact) side, I see #14, then #12, but no obvious spacer after that, and THAT spacer should not be missing (unless it's never been there!). So maybe the spacer IS there on the right side, I just can't tell that it is there, is that possible?

Separately, both schematics you've posted highlight TWO #14 (MC28) or #17 (MC21) bush mounts that seem to bracket the splined rubber bit (#12 of MC28; #13 on MC21); so do I need TWO of the #14 (or #17) RUBBER C bush mounts or just one for the right side? My left-side set-up has just one outside of the splined rubber bit which suggests only one is needed but that doesn't seem to correspond to the diagrams.

Sorry if I'm coming off as thick. You definitely wouldn't want to be in my head on this stuff!

Thanks.
_________________
-Jim
'93 MC21